Proceedings of the International Conference on Advances in Materials Processing and Characterization: Building Future Materials Through Innovation; Two Volumes Sets

Proceedings of the International Conference on Advances in Materials Processing and Characterization: Building Future Materials Through Innovation; Two Volumes Sets Book Description

ContentsVolumes One : Contents
Part 1 - Keynote and Invited Papers : Fatigue Behavior of a Multiphase Medium Carbon V-microalloyed Steel Processed Through Two Thermomechanical Routes *Deformation Processing of Massive Nanostructured Materials *Separation Processes for Advanced Materials *Separation Processes for Advanced Materials *Modelling Metal Forming Processes for Optimum Microstructure and Properties *Parameter Optimization for Better Bond Strength and Wear Resistance of Thermally Sprayed Automotive Components *Synthesis and Processing of Nanostructured Materials

Part 2 Advanced Materials : Structural and Optical Studies on Gallium Nitride Nanowires *Synthesis, Characterization and Mechanical Properties of Sol-Gel Aluminasliver Composites *Preparation and characterization of LaFeO3 by Co-precipitation Method *Size Dependent Properties of Nanocrystalline NiO Electrode for Electrochemical Capacitors *Investigation of Effecting silicon quantum Dots

Part 3 Characterization of Materials : Investigation into Mechanical and Thermal Properties of Polymer Matrix composites (PMC) *Tensile, Flexural and Interlaminar Shear Properties of Woven Jute and Jute-Glass Fabric reinforced Polyester Composites *Influence of Fiber Orientation on the Notched Strength of Woven Hybrid Polymer Composite Laminates *Notched Tensile Strength of Center-Hole Carbon/Cabon Composites *Study of Mechanical Properties of GFRP Composites with Cement and Flyash *Hot Working Characteristics of AZ91 Mg/4.5% Ti Composite *Influence of ageing Period of Ceramic Particle Reinforced Aluminum *Functional Response of D-Gun Sparyed Ceramic Composite *Damage Assessment of Polymeric Composites *Reliability-based design optimization of Fibrous Laminated Composites *Measurement of Thermo-Mechanical and Thermo-Physical Properties of Ti-6A1-4V Alloy *Thermo-Mechanical analysis of Cylindrical Components made of functionally graded materials *Property Characterisation of Stee/Nylon Reinforced Polyester Hybrid composites with Different volume fraction and service temperature subjected to impact loading
Part 4 Machining : Application of generalized predictive control to flank wear model of cutting tools *Investigation and analysis of Ti-6A1-4V Alloy Machining Using Finite Element Method *Experimental Investigation on Parametric Influence and Development of Analytical Model in Micro Turning *Experimental Investigation of Tool Life Improvement by Cryogenic Treatment *Modeling and Optimization of Superabrasive Grinding of Alumina ceramics *Image processing for the estimation of surface roughness of EDM Machined Graphite *Modeling for prediction of surface in machining Ti64 Alloy by CVD Coated Inserts *Study of Influence of Process Parameters of Surface Roughness Finish in Ball Burnishing of Aluminium (A1 6351) Alloy

Part 5 Machining of Composites : Modelling and Analysis of Delamination of Drilling GFRP Composites *Fuzzy Logic Based Defects Constrained Drilling of Polymeric Composites *An Investigation into Drilling of Hybrid Structure of GFRP Composite and Armour Steel *Optimization of Drilling Parameters of Metal Matrix Composites Using Taguchi Technique *Study of Tool Wear by Machining Fabricated A1-SiC (10p) by using CNMA 12048 (PCD Insert 1600 Grade) Under Different Machining Conditions *Stri Casting of Phosphor Brozed Alumina composite and Machining Studies *Machinability analysis of Aluminium Graphite MMC by using a thin film of hard coating of tantalum Nitride on Carbide Insert cutting tool *Neural Network based analysis of machining characteristics of A1/SiCp Composites *Study of Tool wear in turning 15% SiCp Reinforced 6061 Aluminium Metal Matrix composite with Steam as coolant *An Investigation of surface roughness in Grinding of A1-A12O3 Metal Matrix Composites (MMCs)
Part 6 Unconventional Machining of Materials : *Investigation on Electrical Discharge Machining of A384 Al Alloy/SiCp Metal *] An Experimental Investigation of Machining Characteristics in Electrical *Multi-Objective Optimization of Wire Electrical Discharge Machining Process *Experimental Investigation of Optimal Machining Parameters on Diesinking *Electrical Discharge Deep Hole Drilling of Inconel *A.E. Monitoring of Ultrasonic Machining of Al2O3/LaPO4 Composites *Experimental Investigations into the Phenomenon of Material Transfer during
Part 7 - Metal Forming : *Plastic Deformation Characteristic of AZ31 Magnesium Alloy Sheet *Finite Element Analysis and Experimental Validation of Deep Drawing Process *Experimental and Finite Element Simulation of Superplastic Forming of Rectangular Pan *Modeling and Process Control of Superplastic Forming of Rectangular Pan *Effect of Single and Combined Circular Drawbeads in Hemispherical Cup Forming *Comparative Study of Theoretical, Experimental & FEM Simulation of Circular Tube (AISI1010) By Flow Forming *Finite Element Analysis of Effect of Thickness Ratio on Formability of Tailor Welded Blanks in Stretch Forming *Investigation of the Peculiarities of Deforming A Continuously Cast Billet *Modeling of Process of the Soft Reduction of the Continuous - Casting Billet * Barrelling of Copper Solid Cylinders during Cold Upset Forging With Constraint at Both Ends *Analysis of Flow Forming Process for Rocket Motor Casing
Part 8 - Metal Joining : Influence of Cryogenic Treatment on Stress Distribution in Interference Fitted Assemblies *Joining of Polymeric Matrix Composites *Static Strength Characteristics and Damage Analysis of Mechanically Fastened CFRP Composite Joints *Investigations on the Influence of Pulse TIG Welding Parameters on Microstructure and Microhardness of Al-Mg-Si Alloys *Optimization of Weld Bead Geometry in MIG Welding Process Using Response Surface Methodology *Indoor Welding Its Threats and Solutions
Part 9 - Fracture And Fatigue : Fracture Toughness and Transition Temperature in Hard Chrome Coated 547
Structural Materials *Fatigue Crack Growth Life Prediction Using Strain Energy Density Factor *Relationship Between J-Integral and CTOD for Thin Sheets: A FE Study *Fatigue Failure in Cruciform Weld Joints Finite Element Approach *Assessment of Damage Mode in FRP Composite *Effect of Post-Curing on Interlaminar Fracture Toughness of Epoxy Polyurethane/Glass Fiber IPN Composite Laminates

Volumes Two : Contents
Part 10 - Friction And Wear : Wear and Machiniability of In situ Titanium Boride Reinforced Aluminium 591
Alloy *Application of Probabilistic Neural Network for the Development of Wear Mechanism Map For WC-Co Composite *Effect of Cryogenic Treatment on the Wear Rate of High Carbon High 606
Chromium Steel *Estimation of Pressure and Sliding Speed for Wear Test on IC Engine Piston 613
and Liner *Wear and Study Behaviour in Mating SS202 Pin and SS410 Disc at 618 Elevated Temperature under Atmospheric Condition *Comparative Studies on Wear Characterisation of as Cast And Heat-Treated Al Based Metal Matrix Hybrid Composites *Subsurface Damage Studies on the Dry Sliding Wear Behaviour of Al/SiCp 629 *Friction and Slide Wear Characteristics of Glass-Epoxy and Glass-Epoxy Components with Different Fillers *Influence of Indentation and Wear of Acoustic Emission in Chromium Manganese Iron *Estimation of Surface Finish and Effect of Wear Flats in Surface Grinding *Experimental Investigation of Polymer Composite Journal Bearing 660 Under Dry Conditions
Part 11 - Rapid Prototyping / Casting : Mechanical Behaviour of Fused Deposition Modeling Material *Performance of Rapid Prototyping Nozzles *Feature Based Design of Cast Components *Optimization of Process Parameters of Aluminium Alloy Castings using Taguchi Technique *Metallurgical Behaviour of Al-Si Alloy Cast Using Magnetic Molding and Full Mold Process

Part 12 - Modeling And Optimization : Finite Element Analysis of FRP Laminated Indeterminate Beam *Synergy of AI Techniques with Finite Element Method (FEM) Trend Towards Manufacturing Process Design Automation *Finite Element Simulation of Micro-Thermoelastic Behaviour of FRP Lamina with Fiber-Matrix Interface Debond Using Hexagonal Array Model *Automotive E-Coat Paint Process Simulation Using FEA *Total Design Concept of Resin Transfer Molding Products A Novel Approach Using MADM Methodology *Finite Element Analysis for Thermoelastic Behavior of Thin Laminated Composite Plate with an Elliptical Cutout Under Cylindrical Bending *Buckling of Smart Piezoelectric/Piezomagnetic Clamped-free Beam Under Mechanical Loading *Topological Optimization of the Buckling Behaviour of Material Structures *Heat Flux Dispersion in a Bed of Titanium Spheres Under Laser Scan-Studies on Effect of Scan Speed *Finite Element Analysis for Conical Cup Forming *Response Surface Methodology for Optimization and Fractal Characterization of Turned Surface Topography *A Graph Theoretic Approach for Resin Transfer Molding Process Sequencing *Optimal Design of Composite Leaf Spring in Heavy Truck Suspension System *Optimal Design of Various Cross-sections for Composite Leaf Spring Using Generic Algorithm (GA) Approach *Modeling and Multi Response Optimization of Inconel on Machining 815
of CNC WEDM Process *3D Transient Thermal Modelling of Laser Micro-Channel Fabrication in 824
Lime-Soda Glass
Part 13 - Heat Treatment : Influence of Ferritic Nitro Carburising on the Properties of En-19 Steel *Comparative Study of Hardfacing of Valves Using MMAW Process *Effect of Diffusion Temperature in Aluminizing Steel *Modelling and Simulation of Heat Treatment of Complex Shaped Components *Assessment of the Properties of Austenitic Stainless Steels Applying Salt Bath Nitriding with Post-Oxidation
Part 14 Vibration : Chatter Suppression and Surface Roughness Control in Turning Operation Using Magnetorheological Fluid Damper A Neural Network Approach *Vibration Analysis of an Assembly by converting it into a Simple Mass Spring System *Free Vibration Analysis of Three-layered Cu-C Sandwich Beam *Modelling and Simulation of MR Fluid Damper for Chatter Suppression in Machine Tools *Finite Element Dynamic Analysis of Hollow Sandwich Box Columns with an Electrorheological Fluid Core Layer
Part 15 - Biomedical Applications Of Materials :Variation in Crystallographic and Microstructure of Human Cancellous Humerus Bone *Structural Changes in Cadever Bone on Heat Treatments *Development of Biphasic Coatings on Type 316LN Stainless Steel for Biomedical Applications *Studies on Bone Cell Adhesion and Proliferation on Ion Implanted Titanium Discs *

Part 16 - Related Topics : Relationship Between Axisymmetric Bending Solutions of FGM Circular Plates based on Third Order Plate Theory and Classical Plate Theory *Development of Macro Load-Depth Sensing Indentation Device *An Optimum Tooling Design for RTM Process Using Graph Theoretic Approach *An Effective Tool Condition Monitoring System for Turning Process * CNC Oxy-Acetylene Profile Cutting System *A Current Perspective of Computational Nanotechnology * Influence of grinding Aids in Mineral Processing * Investigation in the Failure of Connecting Rod of Heavy Duty Engine for Maharashtra State Road Transport Corporation *Viscosity Measurements of Melts at High Temperatures using Ultrasonic Guided Waves *Evaluation of Inhibitors to Control Rebar Corrosion *Influence of Electron Irradiation on Electrical and Optical Characteristics of (Light Emitting Diodes) LEDs *Mssbauer Spectroscopy Study oF BiXY3-xXFe5O12 Fabricated Using Conventional Method *High-K Layers in Gate-Dielectric of Memory Device *Bulk Texture Development in Hexagonal Zirlo Alloy *Synthesis and Characterization of Polymer Electrolyte Membrane for Fuel Cell Application *Statistical Analysis of Dimensional Variation in Internal Grinding of Bevel Gears *Performance Studies on Resin Bonded and Plated Diamond Abrasive Wheels While Machining MMCS *Evolving A Methodology Towards Burst Strength Prediction of GFRP Pressure Bottles Using Acoustic Emission Technique *Role of Edge Operators in the Estimation of Surface Roughness Using Machine Vision *An Elastic-Plastic Analysis for a Circular Arc Crack *Surface Coatings for High Temperature Applications by Electroforming Techniques *Development of SMAW Electrode for High Strength Carbon Steel Plate Welding

Deliverable Countries: This product ships to India, Sri Lanka.

Customer Reviews : Proceedings of the International Conference on Advances in Materials Processing and Characterization: Building Future Materials Through Innovation; Two Volumes Sets

Discussion : Proceedings of the International Conference on Advances in Materials Processing and Characterization: Building Future Materials Through Innovation; Two Volumes Sets

No Discussion has been started.  See Latest Discussions